Soldered Inkplate 6 FLICK
SolderedElectronics·Soldered-Inkplate-6-FLICK-hardware-design·CAD/V1.2.0/Soldered Inkplate 6 FLICK.kicad_pcb
About the Soldered Inkplate 6 FLICK PCB
Soldered Inkplate 6 FLICK is an open source ESP32 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 150.4 × 107.8 mm, with 329 components from 83 distinct parts.
Its main chip is the ESP32-WROVER, from the ESP32 family. Other key parts include the TPS65186RGZ, CH340C, TPS3840PL27DBVR, MC14093BDTR2G and TPS7A2633DRVR. By type, the board carries 75 test points, 71 capacitors, 60 resistors, 52 relays, 15 ICs and 15 transistors.
From the project
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-6-FLICK designed by Soldered Electronics.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered Inkplate 6 FLICK
Soldered Inkplate 6 FLICK bill of materials (BOM)
329 components, 83 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS65186RGZ | VQFN-49 | U1 |
| 1 | CH340C | SOP-16 | U2 |
| 1 | TPS3840PL27DBVR | SOT-23-5 | U3 |
| 1 | MC14093BDTR2G | TSSOP-14 | U4 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U5 |
| 1 | MCP73831T | SOT-23-5 | U6 |
| 1 | PCF85063A | PCF85063A | U7 |
| 1 | TXS0104EPWR | TXS0104EPWR | U8 |
| 1 | MCP47A1 | MCP47A1-SOT23-6 | U9 |
| 1 | AP5726WG-7 | SOT26 | U10 |
| 1 | ED060XC3 | ED060XC3 | U11 |
| 1 | SN74LVC1G34DBV | SN74LVC1G34DBV | U12 |
| 2 | PCAL6416AHF,128 | PCAL6416AHF,128 | U13, U15 |
| 1 | ESP32-WROVER | ESP32-WROVER | U14 |
| 1 | DNP | SOT-23-3 | Q1 |
| 3 | NMOS | SOT-23-3 | Q2, Q11, Q14 |
| 6 | PMOS | SOT-23-3 | Q3, Q6, Q10, Q12, Q13, Q15 |
| 3 | NPN | SOT-23-3 | Q4, Q5, Q8 |
| 2 | SSM3J358R,LF | SOT-23-3 | Q7, Q9 |
| 1 | 7LC32768F12UC | ABS07AIG-32.768KHZ-7-D-T | X1 |
Show 63 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 4 | STANDOFF_M3 Standoff_M3 | Standoff_M3 | H1, H2, H3, H4 |
| 2 | SMD_JUMPER | SMD_JUMPER | JP1, JP4 |
| 5 | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | SMD_JUMPER_3_PAD_CONNECTED_LEFT_TRACE | JP2, JP3, JP6, JP7, JP8 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | JP5 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K1 |
| 1 | easyC-SMD | easyC-connector | K2 |
| 42 | HEADER_MALE_1X1_INKPLATE HEADER_MALE_1X1_Inkplate | HEADER_MALE_1X1_Inkplate | K3, K4, K5, K6, K7, K16, K17, K18 +34 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K8 |
| 1 | HYC77-TF09-200 | HYC77-TF09-200 | K9 |
| 1 | CR2032_BS-6-1 | CR2032-BS-6-1 | K10 |
| 1 | AXT310124 | AXT310124 | K11 |
| 1 | SFV8R-1STBE1HLF | SFV8R-1STBE1HLF | K12 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K13 |
| 1 | HEADER_MALE_5X1 | HEADER_MALE_5X1 | K14 |
| 1 | FH34SRJ-34S-0.5SH(50) | FH34SRJ-34S-0.5SH(50) | K15 |
| 7 | PAD_4X4 PAD_4x4 | PAD_4x4 | PAD1, PAD2, PAD3, PAD4, PAD5, PAD6, PAD7 |
| 1 | SK-3296S-01-L1 | SK-3296S-01-L1 | S1 |
| 1 | YTSA007A0151803B | YTSA007A0151803B | SW1 |
| 2 | K2-1114SA-A4SW-06 | K2-1114SA-A4SW-06 | SW2, SW3 |
| 75 | TEST_POINT_SMD_0.8MM Test_Point_SMD_0.8mm | Test_Point_SMD_0.8mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +67 |
| 2 | CUS10F30,H3F | SOD-323-2 | D1, D4 |
| 4 | BAT20J | SOD-323 | D2, D3, D5, D9 |
| 2 | BAT54S | SOT-23-3 | D6, D7 |
| 1 | 0603LED_SIDE | LTST-S270GKT | D8 |
| 1 | RED | 0402LED | D10 |
| 2 | M4_DIODA | M4_DIODA | D11, D12 |
| 1 | RB510SM-40FHT2R | SOD-523 | D13 |
| 1 | LQH44PN4R7MP0L | 1515L | L1 |
| 1 | NR4012T2R2M | NR4012 | L2 |
| 1 | NR4012T220M | NR4012 | L3 |
| 16 | 4U7-TMK212AB7475KG-T 4u7-TMK212AB7475KG-T | 0805C | C1, C2, C3, C4, C6, C7, C9, C11 +8 |
| 3 | 10U-GRM188R61E106KA73J 10u-GRM188R61E106KA73J | 0603C | C5, C8, C10 |
| 2 | 2U2-GRM188R61E225MA12D 2u2-GRM188R61E225MA12D | 0603C | C14, C15 |
| 3 | 100P 100p | 0603C | C16, C17, C61 |
| 2 | 10N-AC0603KRX7R8BB103 10n-AC0603KRX7R8BB103 | 0603C | C18, C19 |
| 2 | 100N-AC0603KRX7R8BB104 100n-AC0603KRX7R8BB104 | 0603C | C20, C21 |
| 25 | 100N 100n | 0603C | C22, C23, C25, C29, C30, C31, C34, C39 +17 |
| 4 | 10U 10u | 1206C | C24, C27, C44, C66 |
| 6 | 2U2 2u2 | 0603C | C26, C28, C33, C35, C38, C67 |
| 2 | DNP | 2917C | C32, C70 |
| 2 | 12P 12p | 0603C | C36, C37 |
| 1 | 4U7 4u7 | 0603C | C46 |
| 1 | 1u | 0603C | C47 |
| 2 | CL21B105KBFNNNG | 0805C | C51, C54 |
| 1 | NTC-NCP18XH103F03RB | 0603R | R1 |
| 1 | 43K-RC0603FR-0743KL 43k-RC0603FR-0743KL | 0603R | R2 |
| 6 | 10K 10k | 0603R | R3, R4, R44, R49, R59, R60 |
| 22 | 100K 100k | 0603R | R5, R6, R7, R24, R27, R28, R33, R35 +14 |
| 5 | 4K7 4k7 | 0603R | R8, R9, R10, R11, R12 |
| 2 | 1M | 0603R | R13, R15 |
| 1 | 47K5-RC0603FR-0747K5L 47k5-RC0603FR-0747K5L | 0603R | R14 |
| 1 | 52K3-RC0603FR-0752K3L 52k3-RC0603FR-0752K3L | 0603R | R16 |
| 3 | 5K1 5k1 | 0603R | R17, R18, R55 |
| 2 | DNP | 0603R | R19, R36 |
| 6 | 1k | 0603R | R20, R22, R23, R32, R34, R38 |
| 1 | 0R | 0603R | R21 |
| 1 | 510K 510k | 0603R | R25 |
| 2 | 47R | 0603R | R26, R58 |
| 2 | 47K 47k | 0603R | R29, R56 |
| 2 | 33K 33k | 0603R | R30, R31 |
| 1 | 2K49 2k49 | 0603R | R39 |
| 1 | 15R | 0603R | R54 |
Soldered Inkplate 6 FLICK design files
The KiCad project lives in the SolderedElectronics/Soldered-Inkplate-6-FLICK-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered Inkplate 6 FLICK: common questions
What microcontroller does the Soldered Inkplate 6 FLICK use?
The Soldered Inkplate 6 FLICK is built around the ESP32-WROVER, from the ESP32 family.
How big is the Soldered Inkplate 6 FLICK PCB?
The Soldered Inkplate 6 FLICK measures 150.4 × 107.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered Inkplate 6 FLICK?
329 components, from 83 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered Inkplate 6 FLICK design files?
From the SolderedElectronics/Soldered-Inkplate-6-FLICK-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered Inkplate 6 FLICK design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Soldered Inkplate 6 FLICK without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Soldered-Inkplate-6-FLICK-hardware-design
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k