2 open source boards using the 10uf

Real designs built with the 10uf, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The 10uf in open source designs

The gallery holds 2 open source boards using the 10uf from 2 GitHub repositories; a typical one measures about 56.6 × 47.6 mm and carries around 28 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is AnalogBoard by Maddimax.

Microcontrollers on boards using the 10uf

ESP32 1

10uf: common questions

Where can I find a 10uf reference design?

Each of the 2 boards on this page is a real design using the 10uf. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 10uf use?

Most are built on ESP32 (1).

How big is a typical board using the 10uf?

The median is 56.6 × 47.6 mm, and 100% are two-layer designs.

What is the most popular open source board using the 10uf?

By GitHub stars, AnalogBoard by Maddimax, with 1 stars.

Can I simulate one of these boards using the 10uf before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.