5 open source boards using the DRV8313PWP
Real designs built with the DRV8313PWP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Foc
katherinesiyuchen-sys
77.9 × 34.2 mm73 parts2LMIT1
ESP32ESP32-Gimbal
Visaging
32.3 × 87.6 mm59 parts2LMIT1
STM32Stm32g431-lm2596-board
PipistarXu
142.5 × 99 mm24 parts2LMIT1
Actuator
ANGELOREYES-afk
37.4 × 54.4 mm20 parts2LNo license1
NXPTwo motor driver
owhite
101 × 60 mm52 parts4LNo license0
The DRV8313PWP in open source designs
The gallery holds 5 open source boards using the DRV8313PWP from 5 GitHub repositories; a typical one measures about 77.9 × 60 mm and carries around 52 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Foc by katherinesiyuchen-sys.
What boards using the DRV8313PWP are built for
DRV8313PWP: common questions
Where can I find a DRV8313PWP reference design?
Each of the 5 boards on this page is a real design using the DRV8313PWP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DRV8313PWP use?
Most are built on STM32 (2), ESP32 (1) and NXP (1).
How big is a typical board using the DRV8313PWP?
The median is 77.9 × 60 mm, and 80% are two-layer designs.
What is the most popular open source board using the DRV8313PWP?
By GitHub stars, Foc by katherinesiyuchen-sys, with 1 stars.
Can I simulate one of these boards using the DRV8313PWP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.