1 open source board using the LP2951-5.0_DIP
Real designs built with the LP2951-5.0_DIP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BenRufenachtThe LP2951-5.0_DIP in open source designs
The gallery holds 1 open source boards using the LP2951-5.0_DIP from 1 GitHub repository; a typical one measures about 170 × 95 mm and carries around 130 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is QuantizerBack by BenRufenacht.
Microcontrollers on boards using the LP2951-5.0_DIP
LP2951-5.0_DIP: common questions
Where can I find a LP2951-5.0_DIP reference design?
Each of the 1 boards on this page is a real design using the LP2951-5.0_DIP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LP2951-5.0_DIP use?
Most are built on AVR/Arduino (1).
How big is a typical board using the LP2951-5.0_DIP?
The median is 170 × 95 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP2951-5.0_DIP?
By GitHub stars, QuantizerBack by BenRufenacht, with 1 stars.
Can I simulate one of these boards using the LP2951-5.0_DIP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.