1 open source board using the MEM2012F10R0
Real designs built with the MEM2012F10R0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NOAA-PMELThe MEM2012F10R0 in open source designs
The gallery holds 1 open source boards using the MEM2012F10R0 from 1 GitHub repository; a typical one measures about 76.2 × 44.5 mm and carries around 59 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Flow controller by NOAA-PMEL.
Microcontrollers on boards using the MEM2012F10R0
What boards using the MEM2012F10R0 are built for
MEM2012F10R0: common questions
Where can I find a MEM2012F10R0 reference design?
Each of the 1 boards on this page is a real design using the MEM2012F10R0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MEM2012F10R0 use?
Most are built on TI MSP430/CC (1).
How big is a typical board using the MEM2012F10R0?
The median is 76.2 × 44.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the MEM2012F10R0?
By GitHub stars, Flow controller by NOAA-PMEL, with 0 stars.
Can I simulate one of these boards using the MEM2012F10R0 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.