3 open source boards using the MIC4812
Real designs built with the MIC4812, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Printalyzer UV/VIS Densitometer - Main Board
dektronics
105 × 38 mm81 parts4LNo license6
Printalyzer DensiStick
85 × 22 mm48 parts4LNo license37
Printalyzer UV/VIS Densitometer - Transmission LED Board
20 × 43 mm16 parts2LNo license6
The MIC4812 in open source designs
The gallery holds 3 open source boards using the MIC4812 from 2 GitHub repositories; a typical one measures about 85 × 38 mm and carries around 48 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is Printalyzer DensiStick by dektronics.
Parts used alongside the MIC4812
Microcontrollers on boards using the MIC4812
MIC4812: common questions
Where can I find a MIC4812 reference design?
Each of the 3 boards on this page is a real design using the MIC4812. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC4812 use?
Most are built on STM32 (1).
How big is a typical board using the MIC4812?
The median is 85 × 38 mm, and 33% are two-layer designs.
What is the most popular open source board using the MIC4812?
By GitHub stars, Printalyzer DensiStick by dektronics, with 37 stars.
Can I simulate one of these boards using the MIC4812 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.