2 open source boards using the OPA192
Real designs built with the OPA192, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAMNode
ParadigmHyperloop
127 × 127 mm390 parts4LCustom license11
AVR/ArduinoMotherboard
196.4 × 195.1 mm262 parts2LCustom license11
The OPA192 in open source designs
The gallery holds 2 open source boards using the OPA192 from 1 GitHub repository; a typical one measures about 161.7 × 161 mm and carries around 326 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Node by ParadigmHyperloop.
Microcontrollers on boards using the OPA192
OPA192: common questions
Where can I find a OPA192 reference design?
Each of the 2 boards on this page is a real design using the OPA192. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OPA192 use?
Most are built on AVR/Arduino (1) and Microchip SAM (1).
How big is a typical board using the OPA192?
The median is 161.7 × 161 mm, and 50% are two-layer designs.
What is the most popular open source board using the OPA192?
By GitHub stars, Node by ParadigmHyperloop, with 11 stars.
Can I simulate one of these boards using the OPA192 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.