3 open source boards using the SN74CB3T3245
Real designs built with the SN74CB3T3245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350PicoGUS chipdown with edge rails
polpo
112.9 × 96.7 mm96 parts4LGPL-2.0800
RP2040/RP2350PicoGUS chipdown
102.9 × 96.7 mm92 parts4LGPL-2.0800
PicoGUS Hand386
29.2 × 75.2 mm43 parts4LGPL-2.0800
The SN74CB3T3245 in open source designs
The gallery holds 3 open source boards using the SN74CB3T3245 from 1 GitHub repository; a typical one measures about 102.9 × 96.7 mm and carries around 92 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is PicoGUS chipdown with edge rails by polpo.
Microcontrollers on boards using the SN74CB3T3245
What boards using the SN74CB3T3245 are built for
SN74CB3T3245: common questions
Where can I find a SN74CB3T3245 reference design?
Each of the 3 boards on this page is a real design using the SN74CB3T3245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74CB3T3245 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the SN74CB3T3245?
The median is 102.9 × 96.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74CB3T3245?
By GitHub stars, PicoGUS chipdown with edge rails by polpo, with 800 stars.
Can I simulate one of these boards using the SN74CB3T3245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.