3 open source boards using the SN74LVC1G123
Real designs built with the SN74LVC1G123, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Headphones prototype
strangeparts
60.5 × 76.8 mm52 parts2LMIT493
Headphones flex
41.1 × 25.7 mm32 parts2LMIT493
Headphones flex pcb rigid
41.7 × 25.7 mm32 parts2LMIT493
The SN74LVC1G123 in open source designs
The gallery holds 3 open source boards using the SN74LVC1G123 from 1 GitHub repository; a typical one measures about 41.7 × 25.7 mm and carries around 32 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Headphones prototype pcb by strangeparts.
What boards using the SN74LVC1G123 are built for
SN74LVC1G123: common questions
Where can I find a SN74LVC1G123 reference design?
Each of the 3 boards on this page is a real design using the SN74LVC1G123. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the SN74LVC1G123?
The median is 41.7 × 25.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN74LVC1G123?
By GitHub stars, Headphones prototype pcb by strangeparts, with 493 stars.
Can I simulate one of these boards using the SN74LVC1G123 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.