5 open source boards using the SN75176AD
Real designs built with the SN75176AD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Silicon LabsMWGEN-G1
MR-DOS
100 × 100 mm341 parts4LGPL-3.018
STM32Main Ctrl H7
Aiyin4Da-2
80 × 50 mm146 parts4LMIT0
RP2040/RP2350Output controller
mekatrol
238 × 122 mm161 parts2LNo license0
RP2040/RP2350Controller
140 × 100 mm146 parts2LNo license0
Rs485 board
24.1 × 22.1 mm12 parts2LNo license0
The SN75176AD in open source designs
The gallery holds 5 open source boards using the SN75176AD from 3 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 146 components.
60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is MWGEN-G1 by MR-DOS.
Microcontrollers on boards using the SN75176AD
SN75176AD: common questions
Where can I find a SN75176AD reference design?
Each of the 5 boards on this page is a real design using the SN75176AD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN75176AD use?
Most are built on RP2040/RP2350 (2), Silicon Labs (1) and STM32 (1).
How big is a typical board using the SN75176AD?
The median is 100 × 100 mm, and 60% are two-layer designs.
What is the most popular open source board using the SN75176AD?
By GitHub stars, MWGEN-G1 by MR-DOS, with 18 stars.
Can I simulate one of these boards using the SN75176AD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.