1 open source board using the WCH CH32V307RCT6
Real designs built with the WCH CH32V307RCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ooyang0325The WCH CH32V307RCT6 in open source designs
The gallery holds 1 open source boards using the WCH CH32V307RCT6 from 1 GitHub repository; a typical one measures about 120 × 100 mm and carries around 470 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is DAC HPA by ooyang0325.
Microcontrollers on boards using the WCH CH32V307RCT6
What boards using the WCH CH32V307RCT6 are built for
WCH CH32V307RCT6: common questions
Where can I find a WCH CH32V307RCT6 reference design?
Each of the 1 boards on this page is a real design using the WCH CH32V307RCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the WCH CH32V307RCT6 use?
Most are built on RISC-V (1).
How big is a typical board using the WCH CH32V307RCT6?
The median is 120 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the WCH CH32V307RCT6?
By GitHub stars, DAC HPA by ooyang0325, with 0 stars.
Can I simulate one of these boards using the WCH CH32V307RCT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.