2 open source boards using the AZ1117CR-3.3TRG1

Real designs built with the AZ1117CR-3.3TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The AZ1117CR-3.3TRG1 in open source designs

The gallery holds 2 open source boards using the AZ1117CR-3.3TRG1 from 1 GitHub repository; a typical one measures about 75.3 × 71 mm and carries around 36 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Po midi adapter by Hanz-Tech.

Microcontrollers on boards using the AZ1117CR-3.3TRG1

ESP32 2

What boards using the AZ1117CR-3.3TRG1 are built for

AZ1117CR-3.3TRG1: common questions

Where can I find a AZ1117CR-3.3TRG1 reference design?

Each of the 2 boards on this page is a real design using the AZ1117CR-3.3TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AZ1117CR-3.3TRG1 use?

Most are built on ESP32 (2).

How big is a typical board using the AZ1117CR-3.3TRG1?

The median is 75.3 × 71 mm, and 100% are two-layer designs.

What is the most popular open source board using the AZ1117CR-3.3TRG1?

By GitHub stars, Po midi adapter by Hanz-Tech, with 5 stars.

Can I simulate one of these boards using the AZ1117CR-3.3TRG1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.