4 open source boards using the Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm
Real designs built with the Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Open secure esc 6s 50a can485 faraday
Stab-Rabbit-coding
32 × 66.1 mm51 parts4LCERN-OHL-P-2.01
Open secure esc 6s 50a can485 faraday faceted
23 × 89.5 mm51 parts4LCERN-OHL-P-2.01
Open secure esc 6s 50a can485 faraday sameend
32 × 76.1 mm51 parts4LCERN-OHL-P-2.01
Open secure esc 6s 50a can485 faraday sameend faceted
23 × 89.5 mm51 parts4LCERN-OHL-P-2.01
The Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm in open source designs
The gallery holds 4 open source boards using the Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm from 1 GitHub repository; a typical one measures about 27.5 × 82.8 mm and carries around 51 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Open secure esc 6s 50a can485 faraday sameend by Stab-Rabbit-coding.
Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm: common questions
Where can I find a Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm reference design?
Each of the 4 boards on this page is a real design using the Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm?
The median is 27.5 × 82.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm?
By GitHub stars, Open secure esc 6s 50a can485 faraday sameend by Stab-Rabbit-coding, with 1 stars.
Can I simulate one of these boards using the Infineon_PG-USON-10-2-4_3x3mm_P0.5mm_EP1.7x2.5mm before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.