2 open source boards using the MIC5365-1.8YC5
Real designs built with the MIC5365-1.8YC5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Printalyzer DensiStick
dektronics
85 × 22 mm48 parts4LNo license37
Printalyzer - Meter Probe
40 × 68 mm40 parts4LNo license37
The MIC5365-1.8YC5 in open source designs
The gallery holds 2 open source boards using the MIC5365-1.8YC5 from 1 GitHub repository; a typical one measures about 62.5 × 45 mm and carries around 44 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Printalyzer DensiStick by dektronics.
MIC5365-1.8YC5: common questions
Where can I find a MIC5365-1.8YC5 reference design?
Each of the 2 boards on this page is a real design using the MIC5365-1.8YC5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the MIC5365-1.8YC5?
The median is 62.5 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the MIC5365-1.8YC5?
By GitHub stars, Printalyzer DensiStick by dektronics, with 37 stars.
Can I simulate one of these boards using the MIC5365-1.8YC5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.