1 open source board using the Teensy3.2 - USB ->
Real designs built with the Teensy3.2 - USB ->, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
tomcombriatThe Teensy3.2 - USB -> in open source designs
The gallery holds 1 open source boards using the Teensy3.2 - USB -> from 1 GitHub repository; a typical one measures about 132 × 90.4 mm and carries around 44 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is SAX 3 by tomcombriat.
Microcontrollers on boards using the Teensy3.2 - USB ->
Teensy3.2 - USB ->: common questions
Where can I find a Teensy3.2 - USB -> reference design?
Each of the 1 boards on this page is a real design using the Teensy3.2 - USB ->. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy3.2 - USB -> use?
Most are built on NXP (1).
How big is a typical board using the Teensy3.2 - USB ->?
The median is 132 × 90.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the Teensy3.2 - USB ->?
By GitHub stars, SAX 3 by tomcombriat, with 3 stars.
Can I simulate one of these boards using the Teensy3.2 - USB -> before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.