1 open source board using the 8x8_LED_Matrix
Real designs built with the 8x8_LED_Matrix, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
KnoxMakersThe 8x8_LED_Matrix in open source designs
The gallery holds 1 open source boards using the 8x8_LED_Matrix from 1 GitHub repository; a typical one measures about 82.6 × 100 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Km ultimate badge kit by KnoxMakers.
Microcontrollers on boards using the 8x8_LED_Matrix
What boards using the 8x8_LED_Matrix are built for
8x8_LED_Matrix: common questions
Where can I find a 8x8_LED_Matrix reference design?
Each of the 1 boards on this page is a real design using the 8x8_LED_Matrix. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 8x8_LED_Matrix use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 8x8_LED_Matrix?
The median is 82.6 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the 8x8_LED_Matrix?
By GitHub stars, Km ultimate badge kit by KnoxMakers, with 3 stars.
Can I simulate one of these boards using the 8x8_LED_Matrix before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.