2 open source boards using the Adafruit GPS
Real designs built with the Adafruit GPS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
EasyComm Board
stamina
70 × 80 mm33 parts4LGPL-3.013
RP2040/RP2350Insight
K-Eckert15
69.9 × 26 mm72 parts4LNo license1
The Adafruit GPS in open source designs
The gallery holds 2 open source boards using the Adafruit GPS from 2 GitHub repositories; a typical one measures about 69.9 × 53 mm and carries around 53 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is EasyComm Board by stamina.
Microcontrollers on boards using the Adafruit GPS
What boards using the Adafruit GPS are built for
Adafruit GPS: common questions
Where can I find a Adafruit GPS reference design?
Each of the 2 boards on this page is a real design using the Adafruit GPS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Adafruit GPS use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the Adafruit GPS?
The median is 69.9 × 53 mm, and 0% are two-layer designs.
What is the most popular open source board using the Adafruit GPS?
By GitHub stars, EasyComm Board by stamina, with 13 stars.
Can I simulate one of these boards using the Adafruit GPS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.