2 open source boards using the AP62200TWU
Real designs built with the AP62200TWU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Stepper driver
bluesatunsw
62 × 55.5 mm204 parts6LApache-2.05
STM32Computing power hub
70 × 45 mm182 parts6LApache-2.05
The AP62200TWU in open source designs
The gallery holds 2 open source boards using the AP62200TWU from 1 GitHub repository; a typical one measures about 66 × 50.3 mm and carries around 193 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Stepper driver by bluesatunsw.
Microcontrollers on boards using the AP62200TWU
What boards using the AP62200TWU are built for
AP62200TWU: common questions
Where can I find a AP62200TWU reference design?
Each of the 2 boards on this page is a real design using the AP62200TWU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP62200TWU use?
Most are built on STM32 (2).
How big is a typical board using the AP62200TWU?
The median is 66 × 50.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP62200TWU?
By GitHub stars, Stepper driver by bluesatunsw, with 5 stars.
Can I simulate one of these boards using the AP62200TWU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.