1 open source board using the ATWILC3000-MR110CA
Real designs built with the ATWILC3000-MR110CA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
jncroninThe ATWILC3000-MR110CA in open source designs
The gallery holds 1 open source boards using the ATWILC3000-MR110CA from 1 GitHub repository; a typical one measures about 107.9 × 158.8 mm and carries around 276 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Gk pcbv3 by jncronin.
Microcontrollers on boards using the ATWILC3000-MR110CA
What boards using the ATWILC3000-MR110CA are built for
ATWILC3000-MR110CA: common questions
Where can I find a ATWILC3000-MR110CA reference design?
Each of the 1 boards on this page is a real design using the ATWILC3000-MR110CA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATWILC3000-MR110CA use?
Most are built on STM32 (1).
How big is a typical board using the ATWILC3000-MR110CA?
The median is 107.9 × 158.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the ATWILC3000-MR110CA?
By GitHub stars, Gk pcbv3 by jncronin, with 78 stars.
Can I simulate one of these boards using the ATWILC3000-MR110CA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.