3 open source boards using the AZ1117H-3.3TRG1
Real designs built with the AZ1117H-3.3TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Kv4p HT
VanceVagell
38.1 × 82.6 mm87 parts4LGPL-3.0814
ESP32Kv4p HT
80 × 47 mm87 parts4LGPL-3.0814
ESP32Kv4p HT
81.2 × 96.6 mm70 parts4LGPL-3.0814
The AZ1117H-3.3TRG1 in open source designs
The gallery holds 3 open source boards using the AZ1117H-3.3TRG1 from 1 GitHub repository; a typical one measures about 80 × 82.6 mm and carries around 87 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Kv4p HT by VanceVagell.
Microcontrollers on boards using the AZ1117H-3.3TRG1
What boards using the AZ1117H-3.3TRG1 are built for
AZ1117H-3.3TRG1: common questions
Where can I find a AZ1117H-3.3TRG1 reference design?
Each of the 3 boards on this page is a real design using the AZ1117H-3.3TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AZ1117H-3.3TRG1 use?
Most are built on ESP32 (3).
How big is a typical board using the AZ1117H-3.3TRG1?
The median is 80 × 82.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the AZ1117H-3.3TRG1?
By GitHub stars, Kv4p HT by VanceVagell, with 814 stars.
Can I simulate one of these boards using the AZ1117H-3.3TRG1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.