2 open source boards using the BD42540FJ-CE2
Real designs built with the BD42540FJ-CE2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Analog i
deimoscontrols
223 × 95 mm568 parts4LNo license43
Analog frontend panel
164.4 × 89.5 mm377 parts4LNo license43
The BD42540FJ-CE2 in open source designs
The gallery holds 2 open source boards using the BD42540FJ-CE2 from 1 GitHub repository; a typical one measures about 193.7 × 92.3 mm and carries around 473 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Analog i by deimoscontrols.
Microcontrollers on boards using the BD42540FJ-CE2
BD42540FJ-CE2: common questions
Where can I find a BD42540FJ-CE2 reference design?
Each of the 2 boards on this page is a real design using the BD42540FJ-CE2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BD42540FJ-CE2 use?
Most are built on STM32 (1).
How big is a typical board using the BD42540FJ-CE2?
The median is 193.7 × 92.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the BD42540FJ-CE2?
By GitHub stars, Analog i by deimoscontrols, with 43 stars.
Can I simulate one of these boards using the BD42540FJ-CE2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.