2 open source boards using the BQ25792
Real designs built with the BQ25792, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Ferret
fullyautomated
50 × 50 mm116 parts4LNo license20
RP2040/RP2350Nref motherboard
cetola
122.6 × 75.9 mm269 parts6LNo license0
The BQ25792 in open source designs
The gallery holds 2 open source boards using the BQ25792 from 2 GitHub repositories; a typical one measures about 86.3 × 63 mm and carries around 193 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Ferret by fullyautomated.
Parts used alongside the BQ25792
Microcontrollers on boards using the BQ25792
What boards using the BQ25792 are built for
BQ25792: common questions
Where can I find a BQ25792 reference design?
Each of the 2 boards on this page is a real design using the BQ25792. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BQ25792 use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the BQ25792?
The median is 86.3 × 63 mm, and 0% are two-layer designs.
What is the most popular open source board using the BQ25792?
By GitHub stars, Ferret by fullyautomated, with 20 stars.
Can I simulate one of these boards using the BQ25792 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.