2 open source boards using the CAM-M8C-0-10
Real designs built with the CAM-M8C-0-10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32D4 small
unsurv
32 × 45 mm53 parts4LGPL-3.073
ESP32D4 small pcb panel
83 × 109 mm53 parts4LGPL-3.073
The CAM-M8C-0-10 in open source designs
The gallery holds 2 open source boards using the CAM-M8C-0-10 from 1 GitHub repository; a typical one measures about 57.5 × 77 mm and carries around 53 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is D4 small pcb by unsurv.
Microcontrollers on boards using the CAM-M8C-0-10
What boards using the CAM-M8C-0-10 are built for
CAM-M8C-0-10: common questions
Where can I find a CAM-M8C-0-10 reference design?
Each of the 2 boards on this page is a real design using the CAM-M8C-0-10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CAM-M8C-0-10 use?
Most are built on ESP32 (2).
How big is a typical board using the CAM-M8C-0-10?
The median is 57.5 × 77 mm, and 0% are two-layer designs.
What is the most popular open source board using the CAM-M8C-0-10?
By GitHub stars, D4 small pcb by unsurv, with 73 stars.
Can I simulate one of these boards using the CAM-M8C-0-10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.