1 open source board using the DG406
Real designs built with the DG406, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
brer-rabbitThe DG406 in open source designs
The gallery holds 1 open source boards using the DG406 from 1 GitHub repository; a typical one measures about 80 × 80 mm and carries around 139 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Z3340 VCO by brer-rabbit.
What boards using the DG406 are built for
DG406: common questions
Where can I find a DG406 reference design?
Each of the 1 boards on this page is a real design using the DG406. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the DG406?
The median is 80 × 80 mm, and 0% are two-layer designs.
What is the most popular open source board using the DG406?
By GitHub stars, Z3340 VCO by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the DG406 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.