1 open source board using the DG413
Real designs built with the DG413, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Len42The DG413 in open source designs
The gallery holds 1 open source boards using the DG413 from 1 GitHub repository; a typical one measures about 40.3 × 108.2 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Eurorack Dual Envelope Module by Len42.
Microcontrollers on boards using the DG413
What boards using the DG413 are built for
DG413: common questions
Where can I find a DG413 reference design?
Each of the 1 boards on this page is a real design using the DG413. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DG413 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the DG413?
The median is 40.3 × 108.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the DG413?
By GitHub stars, Eurorack Dual Envelope Module by Len42, with 50 stars.
Can I simulate one of these boards using the DG413 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.