3 open source boards using the DG442XY
Real designs built with the DG442XY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 65 partsNXP
Open source potentiostat
samueloblenes
65 partsCERN-OHL-S-2.00 
Z3372 Filter
brer-rabbit
80 × 80 mm120 parts4LGPL-3.068
Raspberry PiZoxnoxious Backplane and VCA
133.8 × 102.9 mm86 parts4LGPL-3.068
The DG442XY in open source designs
The gallery holds 3 open source boards using the DG442XY from 2 GitHub repositories; a typical one measures about 106.9 × 91.5 mm and carries around 86 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Z3372 Filter by brer-rabbit.
Parts used alongside the DG442XY
Microcontrollers on boards using the DG442XY
What boards using the DG442XY are built for
DG442XY: common questions
Where can I find a DG442XY reference design?
Each of the 3 boards on this page is a real design using the DG442XY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DG442XY use?
Most are built on NXP (1) and Raspberry Pi (1).
How big is a typical board using the DG442XY?
The median is 106.9 × 91.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the DG442XY?
By GitHub stars, Z3372 Filter by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the DG442XY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.