2 open source boards using the DMG1024UV-7
Real designs built with the DMG1024UV-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Black magic probe
atopile
48.1 × 19.2 mm61 parts2LMIT29
STM32Black magic debugger
23.7 × 14.4 mm52 parts2LMIT29
The DMG1024UV-7 in open source designs
The gallery holds 2 open source boards using the DMG1024UV-7 from 1 GitHub repository; a typical one measures about 35.9 × 16.8 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Black magic probe by atopile.
Microcontrollers on boards using the DMG1024UV-7
What boards using the DMG1024UV-7 are built for
DMG1024UV-7: common questions
Where can I find a DMG1024UV-7 reference design?
Each of the 2 boards on this page is a real design using the DMG1024UV-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DMG1024UV-7 use?
Most are built on STM32 (2).
How big is a typical board using the DMG1024UV-7?
The median is 35.9 × 16.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the DMG1024UV-7?
By GitHub stars, Black magic probe by atopile, with 29 stars.
Can I simulate one of these boards using the DMG1024UV-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.