1 open source board using the ESP32S3WM1UN16R8
Real designs built with the ESP32S3WM1UN16R8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
fe871baeThe ESP32S3WM1UN16R8 in open source designs
The gallery holds 1 open source boards using the ESP32S3WM1UN16R8 from 1 GitHub repository; a typical one measures about 280 × 145 mm and carries around 103 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Repulsive Maglev by fe871bae.
Microcontrollers on boards using the ESP32S3WM1UN16R8
ESP32S3WM1UN16R8: common questions
Where can I find a ESP32S3WM1UN16R8 reference design?
Each of the 1 boards on this page is a real design using the ESP32S3WM1UN16R8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32S3WM1UN16R8 use?
Most are built on ESP32 (1).
How big is a typical board using the ESP32S3WM1UN16R8?
The median is 280 × 145 mm, and 0% are two-layer designs.
What is the most popular open source board using the ESP32S3WM1UN16R8?
By GitHub stars, Repulsive Maglev by fe871bae, with 0 stars.
Can I simulate one of these boards using the ESP32S3WM1UN16R8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.