1 open source board using the I2C_OLED_128x32
Real designs built with the I2C_OLED_128x32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
hb020The I2C_OLED_128x32 in open source designs
The gallery holds 1 open source boards using the I2C_OLED_128x32 from 1 GitHub repository; a typical one measures about 106.1 × 29.2 mm and carries around 143 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Batterymeter by hb020.
Microcontrollers on boards using the I2C_OLED_128x32
What boards using the I2C_OLED_128x32 are built for
I2C_OLED_128x32: common questions
Where can I find a I2C_OLED_128x32 reference design?
Each of the 1 boards on this page is a real design using the I2C_OLED_128x32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the I2C_OLED_128x32 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the I2C_OLED_128x32?
The median is 106.1 × 29.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the I2C_OLED_128x32?
By GitHub stars, Batterymeter by hb020, with 19 stars.
Can I simulate one of these boards using the I2C_OLED_128x32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.