3 open source boards using the INA238
Real designs built with the INA238, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Atx-24pin rev3-candidate
nathanfraske
86 × 95 mm126 parts6LApache-2.00
ESP32Pcie3-rev2
103.4 × 44 mm54 parts4LApache-2.00
ESP32Pcie3-rev2-routed
103.4 × 44 mm54 parts4LApache-2.00
The INA238 in open source designs
The gallery holds 3 open source boards using the INA238 from 1 GitHub repository; a typical one measures about 103.4 × 44 mm and carries around 54 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Atx-24pin rev3-candidate by nathanfraske.
Microcontrollers on boards using the INA238
INA238: common questions
Where can I find a INA238 reference design?
Each of the 3 boards on this page is a real design using the INA238. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA238 use?
Most are built on ESP32 (3).
How big is a typical board using the INA238?
The median is 103.4 × 44 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA238?
By GitHub stars, Atx-24pin rev3-candidate by nathanfraske, with 0 stars.
Can I simulate one of these boards using the INA238 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.