1 open source board using the LM2941CS
Real designs built with the LM2941CS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ikester1The LM2941CS in open source designs
The gallery holds 1 open source boards using the LM2941CS from 1 GitHub repository; a typical one measures about 63 × 70 mm and carries around 25 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Tige-TAPS2 by ikester1.
Microcontrollers on boards using the LM2941CS
LM2941CS: common questions
Where can I find a LM2941CS reference design?
Each of the 1 boards on this page is a real design using the LM2941CS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM2941CS use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the LM2941CS?
The median is 63 × 70 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM2941CS?
By GitHub stars, Tige-TAPS2 by ikester1, with 1 stars.
Can I simulate one of these boards using the LM2941CS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.