1 open source board using the LM4040C30
Real designs built with the LM4040C30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
shabaz123The LM4040C30 in open source designs
The gallery holds 1 open source boards using the LM4040C30 from 1 GitHub repository; a typical one measures about 14 × 1 mm and carries around 81 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Vectorscope GuyFawkes by shabaz123.
Microcontrollers on boards using the LM4040C30
LM4040C30: common questions
Where can I find a LM4040C30 reference design?
Each of the 1 boards on this page is a real design using the LM4040C30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM4040C30 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the LM4040C30?
The median is 14 × 1 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM4040C30?
By GitHub stars, Vectorscope GuyFawkes by shabaz123, with 3 stars.
Can I simulate one of these boards using the LM4040C30 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.