3 open source boards using the LP2950-5.0_TO92
Real designs built with the LP2950-5.0_TO92, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BMW E30 Late Model SI Board
Ansel84
300 × 53 mm117 parts2LMIT2
ESP8266ECE 445L Baseline Project
mjetpurwala
194.9 × 93 mm61 parts2LNo license0
NXPTeensyv
english1234
100 × 100 mm74 parts2LGPL-2.068
The LP2950-5.0_TO92 in open source designs
The gallery holds 3 open source boards using the LP2950-5.0_TO92 from 3 GitHub repositories; a typical one measures about 194.9 × 93 mm and carries around 74 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Teensyv by english1234.
What boards using the LP2950-5.0_TO92 are built for
LP2950-5.0_TO92: common questions
Where can I find a LP2950-5.0_TO92 reference design?
Each of the 3 boards on this page is a real design using the LP2950-5.0_TO92. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LP2950-5.0_TO92 use?
Most are built on ESP8266 (1) and NXP (1).
How big is a typical board using the LP2950-5.0_TO92?
The median is 194.9 × 93 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP2950-5.0_TO92?
By GitHub stars, Teensyv by english1234, with 68 stars.
Can I simulate one of these boards using the LP2950-5.0_TO92 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.