2 open source boards using the NA(USBLC6-2P6)

Real designs built with the NA(USBLC6-2P6), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The NA(USBLC6-2P6) in open source designs

The gallery holds 2 open source boards using the NA(USBLC6-2P6) from 1 GitHub repository; a typical one measures about 104 × 68 mm and carries around 112 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is ESP32-SBC-FabGL Rev A by OLIMEX.

Microcontrollers on boards using the NA(USBLC6-2P6)

ESP32 2

NA(USBLC6-2P6): common questions

Where can I find a NA(USBLC6-2P6) reference design?

Each of the 2 boards on this page is a real design using the NA(USBLC6-2P6). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the NA(USBLC6-2P6) use?

Most are built on ESP32 (2).

How big is a typical board using the NA(USBLC6-2P6)?

The median is 104 × 68 mm, and 100% are two-layer designs.

What is the most popular open source board using the NA(USBLC6-2P6)?

By GitHub stars, ESP32-SBC-FabGL Rev A by OLIMEX, with 29 stars.

Can I simulate one of these boards using the NA(USBLC6-2P6) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.