2 open source boards using the NCP718
Real designs built with the NCP718, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAMLora - RS485 bridge
RainDrop-lora
63 × 50 mm62 parts4LApache-2.010
STM32Stm32-usbcpd trigger
mothenjoyer69
24.4 × 14 mm22 parts2LMIT1
The NCP718 in open source designs
The gallery holds 2 open source boards using the NCP718 from 2 GitHub repositories; a typical one measures about 43.7 × 32 mm and carries around 42 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Lora - RS485 bridge by RainDrop-lora.
Microcontrollers on boards using the NCP718
What boards using the NCP718 are built for
NCP718: common questions
Where can I find a NCP718 reference design?
Each of the 2 boards on this page is a real design using the NCP718. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the NCP718 use?
Most are built on Microchip SAM (1) and STM32 (1).
How big is a typical board using the NCP718?
The median is 43.7 × 32 mm, and 50% are two-layer designs.
What is the most popular open source board using the NCP718?
By GitHub stars, Lora - RS485 bridge by RainDrop-lora, with 10 stars.
Can I simulate one of these boards using the NCP718 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.