2 open source boards using the NEO_M8

Real designs built with the NEO_M8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The NEO_M8 in open source designs

The gallery holds 2 open source boards using the NEO_M8 from 2 GitHub repositories; a typical one measures about 70.6 × 47.4 mm and carries around 92 components.

50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is GpsDaughterBoard by gregdavill.

What boards using the NEO_M8 are built for

RF & radio 1

NEO_M8: common questions

Where can I find a NEO_M8 reference design?

Each of the 2 boards on this page is a real design using the NEO_M8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the NEO_M8?

The median is 70.6 × 47.4 mm, and 50% are two-layer designs.

What is the most popular open source board using the NEO_M8?

By GitHub stars, GpsDaughterBoard by gregdavill, with 21 stars.

Can I simulate one of these boards using the NEO_M8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.