1 open source board using the OLED_0.91-I2C
Real designs built with the OLED_0.91-I2C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
samanbeerThe OLED_0.91-I2C in open source designs
The gallery holds 1 open source boards using the OLED_0.91-I2C from 1 GitHub repository; a typical one measures about 50.9 × 44.4 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is PD65W Charger by samanbeer.
Microcontrollers on boards using the OLED_0.91-I2C
What boards using the OLED_0.91-I2C are built for
OLED_0.91-I2C: common questions
Where can I find a OLED_0.91-I2C reference design?
Each of the 1 boards on this page is a real design using the OLED_0.91-I2C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OLED_0.91-I2C use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the OLED_0.91-I2C?
The median is 50.9 × 44.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the OLED_0.91-I2C?
By GitHub stars, PD65W Charger by samanbeer, with 0 stars.
Can I simulate one of these boards using the OLED_0.91-I2C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.