1 open source board using the OPA333AIDR
Real designs built with the OPA333AIDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
waterloo-rocketryThe OPA333AIDR in open source designs
The gallery holds 1 open source boards using the OPA333AIDR from 1 GitHub repository; a typical one measures about 33 × 58.4 mm and carries around 79 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Rocket power board by waterloo-rocketry.
Microcontrollers on boards using the OPA333AIDR
What boards using the OPA333AIDR are built for
OPA333AIDR: common questions
Where can I find a OPA333AIDR reference design?
Each of the 1 boards on this page is a real design using the OPA333AIDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OPA333AIDR use?
Most are built on PIC (1).
How big is a typical board using the OPA333AIDR?
The median is 33 × 58.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the OPA333AIDR?
By GitHub stars, Rocket power board by waterloo-rocketry, with 14 stars.
Can I simulate one of these boards using the OPA333AIDR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.