1 open source board using the Pro Mini 3V3/8MHz
Real designs built with the Pro Mini 3V3/8MHz, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
joseluuThe Pro Mini 3V3/8MHz in open source designs
The gallery holds 1 open source boards using the Pro Mini 3V3/8MHz from 1 GitHub repository; a typical one measures about 80 × 50 mm and carries around 38 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Ic202-frequency meter by joseluu.
Microcontrollers on boards using the Pro Mini 3V3/8MHz
Pro Mini 3V3/8MHz: common questions
Where can I find a Pro Mini 3V3/8MHz reference design?
Each of the 1 boards on this page is a real design using the Pro Mini 3V3/8MHz. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Pro Mini 3V3/8MHz use?
Most are built on AVR/Arduino (1).
How big is a typical board using the Pro Mini 3V3/8MHz?
The median is 80 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the Pro Mini 3V3/8MHz?
By GitHub stars, Ic202-frequency meter by joseluu, with 0 stars.
Can I simulate one of these boards using the Pro Mini 3V3/8MHz before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.