1 open source board using the sc189(Z) 3.3v
Real designs built with the sc189(Z) 3.3v, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
martinribelottaThe sc189(Z) 3.3v in open source designs
The gallery holds 1 open source boards using the sc189(Z) 3.3v from 1 GitHub repository; a typical one measures about 85.8 × 137 mm and carries around 113 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Poncho fpga by martinribelotta.
Microcontrollers on boards using the sc189(Z) 3.3v
sc189(Z) 3.3v: common questions
Where can I find a sc189(Z) 3.3v reference design?
Each of the 1 boards on this page is a real design using the sc189(Z) 3.3v. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the sc189(Z) 3.3v use?
Most are built on FPGA (1).
How big is a typical board using the sc189(Z) 3.3v?
The median is 85.8 × 137 mm, and 100% are two-layer designs.
What is the most popular open source board using the sc189(Z) 3.3v?
By GitHub stars, Poncho fpga by martinribelotta, with 6 stars.
Can I simulate one of these boards using the sc189(Z) 3.3v before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.