1 open source board using the SDB628
Real designs built with the SDB628, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FinnKrassThe SDB628 in open source designs
The gallery holds 1 open source boards using the SDB628 from 1 GitHub repository; a typical one measures about 43.1 × 37.7 mm and carries around 63 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is MX-Break-In-Machine by FinnKrass.
Microcontrollers on boards using the SDB628
SDB628: common questions
Where can I find a SDB628 reference design?
Each of the 1 boards on this page is a real design using the SDB628. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SDB628 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the SDB628?
The median is 43.1 × 37.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the SDB628?
By GitHub stars, MX-Break-In-Machine by FinnKrass, with 15 stars.
Can I simulate one of these boards using the SDB628 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.