2 open source boards using the SN74LVC08 AND gates

Real designs built with the SN74LVC08 AND gates, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The SN74LVC08 AND gates in open source designs

The gallery holds 2 open source boards using the SN74LVC08 AND gates from 1 GitHub repository; a typical one measures about 790 × 980 mm and carries around 179 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is BedCAN MCP by matheusfalcaopinto.

Microcontrollers on boards using the SN74LVC08 AND gates

RP2040/RP2350 2

SN74LVC08 AND gates: common questions

Where can I find a SN74LVC08 AND gates reference design?

Each of the 2 boards on this page is a real design using the SN74LVC08 AND gates. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74LVC08 AND gates use?

Most are built on RP2040/RP2350 (2).

How big is a typical board using the SN74LVC08 AND gates?

The median is 790 × 980 mm, and 100% are two-layer designs.

What is the most popular open source board using the SN74LVC08 AND gates?

By GitHub stars, BedCAN MCP by matheusfalcaopinto, with 0 stars.

Can I simulate one of these boards using the SN74LVC08 AND gates before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.