1 open source board using the STM32F303CCT6
Real designs built with the STM32F303CCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RGBKBThe STM32F303CCT6 in open source designs
The gallery holds 1 open source boards using the STM32F303CCT6 from 1 GitHub repository; a typical one measures about 154 × 105.1 mm and carries around 436 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Mun by RGBKB.
Microcontrollers on boards using the STM32F303CCT6
What boards using the STM32F303CCT6 are built for
STM32F303CCT6: common questions
Where can I find a STM32F303CCT6 reference design?
Each of the 1 boards on this page is a real design using the STM32F303CCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F303CCT6 use?
Most are built on STM32 (1).
How big is a typical board using the STM32F303CCT6?
The median is 154 × 105.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the STM32F303CCT6?
By GitHub stars, Mun by RGBKB, with 113 stars.
Can I simulate one of these boards using the STM32F303CCT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.