5 open source boards using the STM32F303CCT6
Real designs built with the STM32F303CCT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mun
RGBKB
154 × 105.1 mm436 parts2LGPL-3.0113STM32
Nack
farfalleflickan
247.7 × 84 mm240 parts2LAGPL-3.011STM32
NHW68
dingyifei
282.7 × 117.3 mm256 parts2LMIT6STM32
OIBUS MOSFET driver module
o16s
90.2 × 95.9 mm143 parts2LNo license0STM32
BMS-Master
UCDFS
135.1 × 159.4 mm218 parts2LNo license0
How designs wire the STM32F303CCT6
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F303CCT6 connects to, and the resistors, capacitors and other passives placed on it.
- The PF0/I2C2_SDA/RCC_OSC_IN/ pin has a capacitor to GND on 5 of 5 designs, most often 22 pF (then 10 pF).
- The PF0/I2C2_SDA/RCC_OSC_IN/ pin has a crystal on 5 of 5 designs, most often 8 MHz (then 16 MHz).
- The VDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
- The VBAT pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 40% · not connected 20% · a signal 40% |
|
| PC13/RTC_OUT_ALARM/RTC_Opin 2 | Connected to: Not connected 60% · a signal 40% | — |
| PC14/RCC_OSC32_INpin 3 | Connected to: Not connected 60% · a signal 40% | — |
| PC15/ADC1_EXTI15/ADC2_EXpin 4 | Connected to: Not connected 80% · a signal 20% | — |
| PF0/I2C2_SDA/RCC_OSC_IN/pin 5 | Connected to: Signal 100% |
|
| PF1/I2C2_SCL/RCC_OSC_OUTpin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: A connector 80% |
|
| VSSApin 8 | Connected to: GND 100% | — |
| VDDApin 9 | Connected to: 3.3V 60% · a signal 40% |
|
| ADC1_IN4/COMP2_INP/OPAMPpin 13 | Connected to: Signal 100% |
|
| PB0/ADC3_IN12/COMP4_INP/pin 18 | Connected to: Signal 100% |
|
| VSSpin 23, 35, 47 | Connected to: GND 100% | — |
| VDDpin 24, 36, 48 | Connected to: 3.3V 80% · a signal 20% |
|
| COMP5_OUT/DAC_EXTI9/I2C2pin 30 | Connected to: Signal 100% |
|
| COMP6_OUT/I2C2_SDA/TIM17pin 31 | Connected to: Signal 100% |
|
| ADC1_EXTI11/ADC2_EXTI11/pin 32 | Connected to: Signal 100% |
|
| CAN_TX/COMP2_OUT/TIM16_Cpin 33 | Connected to: Signal 100% |
|
| BOOT0pin 44 | Connected to: Signal 60% · GND 40% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mun by RGBKB, Nack by farfalleflickan, NHW68 by dingyifei and OIBUS MOSFET driver module by o16s.
The STM32F303CCT6 in open source designs
The gallery holds 5 open source boards using the STM32F303CCT6 from 5 GitHub repositories; a typical one measures about 154 × 105.1 mm and carries around 240 components.
100% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Mun by RGBKB.
Microcontrollers on boards using the STM32F303CCT6
What boards using the STM32F303CCT6 are built for
STM32F303CCT6: common questions
Where can I find a STM32F303CCT6 reference design?
Each of the 5 boards on this page is a real design using the STM32F303CCT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F303CCT6 PF0/I2C2_SDA/RCC_OSC_IN/ pin connected?
The PF0/I2C2_SDA/RCC_OSC_IN/ pin has a capacitor to GND on 5 of 5 designs, most often 22 pF (then 10 pF). Counted from the KiCad layouts of 5 open source designs using the STM32F303CCT6.
What decoupling capacitors do designs use on the STM32F303CCT6 VDD pin?
The VDD pins have a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F303CCT6.
How is the STM32F303CCT6 VBAT pin connected?
The VBAT pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F303CCT6.
Which microcontrollers do boards using the STM32F303CCT6 use?
Most are built on STM32 (5).
How big is a typical board using the STM32F303CCT6?
The median is 154 × 105.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the STM32F303CCT6?
By GitHub stars, Mun by RGBKB, with 113 stars.
Can I simulate one of these boards using the STM32F303CCT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.