1 open source board using the STM32MP255DAI3
Real designs built with the STM32MP255DAI3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
jncroninThe STM32MP255DAI3 in open source designs
The gallery holds 1 open source boards using the STM32MP255DAI3 from 1 GitHub repository; a typical one measures about 120.7 × 110 mm and carries around 245 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Gk by jncronin.
Microcontrollers on boards using the STM32MP255DAI3
What boards using the STM32MP255DAI3 are built for
STM32MP255DAI3: common questions
Where can I find a STM32MP255DAI3 reference design?
Each of the 1 boards on this page is a real design using the STM32MP255DAI3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32MP255DAI3 use?
Most are built on STM32 (1).
How big is a typical board using the STM32MP255DAI3?
The median is 120.7 × 110 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32MP255DAI3?
By GitHub stars, Gk by jncronin, with 78 stars.
Can I simulate one of these boards using the STM32MP255DAI3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.