4 open source boards using the TEENSY_3.5
Real designs built with the TEENSY_3.5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPVehicleController
UNCAMotorsports
99.1 × 57.2 mm139 parts2LMIT2
NXPVasulka Brotherhood
bitzombie1
243.8 × 332.7 mm276 parts2LNo license1
NXPVehicleControllerwut
99.1 × 57.2 mm139 parts2LMIT2
NXPEnergy Meter
45.7 × 39.6 mm33 parts2LMIT2
The TEENSY_3.5 in open source designs
The gallery holds 4 open source boards using the TEENSY_3.5 from 2 GitHub repositories; a typical one measures about 99.1 × 57.2 mm and carries around 139 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is VehicleControllerwut by UNCAMotorsports.
Microcontrollers on boards using the TEENSY_3.5
TEENSY_3.5: common questions
Where can I find a TEENSY_3.5 reference design?
Each of the 4 boards on this page is a real design using the TEENSY_3.5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TEENSY_3.5 use?
Most are built on NXP (4).
How big is a typical board using the TEENSY_3.5?
The median is 99.1 × 57.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the TEENSY_3.5?
By GitHub stars, VehicleControllerwut by UNCAMotorsports, with 2 stars.
Can I simulate one of these boards using the TEENSY_3.5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.