2 open source boards using the TLP172GM
Real designs built with the TLP172GM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoDiyBMS-CurrentShunt
stuartpittaway
90 × 72 mm45 parts2LCC-BY-NC-4.057
RP2040/RP2350Heizung Pünterswis
hmaerki
100 × 160 mm57 parts2LMIT2
The TLP172GM in open source designs
The gallery holds 2 open source boards using the TLP172GM from 2 GitHub repositories; a typical one measures about 95 × 116 mm and carries around 51 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is DiyBMS-CurrentShunt by stuartpittaway.
Microcontrollers on boards using the TLP172GM
What boards using the TLP172GM are built for
TLP172GM: common questions
Where can I find a TLP172GM reference design?
Each of the 2 boards on this page is a real design using the TLP172GM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLP172GM use?
Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the TLP172GM?
The median is 95 × 116 mm, and 100% are two-layer designs.
What is the most popular open source board using the TLP172GM?
By GitHub stars, DiyBMS-CurrentShunt by stuartpittaway, with 57 stars.
Can I simulate one of these boards using the TLP172GM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.