2 open source boards using the TPS54360DDA
Real designs built with the TPS54360DDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Womo
muccc
254.9 × 150.1 mm532 parts4LGPL-3.084
AVR/ArduinoSatNOGS Rotator Controller v2.4
AFS-pt
100 × 80 mm65 parts2LNo license15
The TPS54360DDA in open source designs
The gallery holds 2 open source boards using the TPS54360DDA from 2 GitHub repositories; a typical one measures about 177.4 × 115.1 mm and carries around 299 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Womo by muccc.
Microcontrollers on boards using the TPS54360DDA
TPS54360DDA: common questions
Where can I find a TPS54360DDA reference design?
Each of the 2 boards on this page is a real design using the TPS54360DDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS54360DDA use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the TPS54360DDA?
The median is 177.4 × 115.1 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS54360DDA?
By GitHub stars, Womo by muccc, with 84 stars.
Can I simulate one of these boards using the TPS54360DDA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.