2 open source boards using the TPS92511

Real designs built with the TPS92511, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The TPS92511 in open source designs

The gallery holds 2 open source boards using the TPS92511 from 1 GitHub repository; a typical one measures about 50 × 49.9 mm and carries around 47 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Led spot by ervanalb.

Microcontrollers on boards using the TPS92511

STM32 2

TPS92511: common questions

Where can I find a TPS92511 reference design?

Each of the 2 boards on this page is a real design using the TPS92511. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS92511 use?

Most are built on STM32 (2).

How big is a typical board using the TPS92511?

The median is 50 × 49.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS92511?

By GitHub stars, Led spot by ervanalb, with 8 stars.

Can I simulate one of these boards using the TPS92511 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.