1 open source board using the USBLC6-2SC6 / ESD
Real designs built with the USBLC6-2SC6 / ESD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ArsenShanaThe USBLC6-2SC6 / ESD in open source designs
The gallery holds 1 open source boards using the USBLC6-2SC6 / ESD from 1 GitHub repository; a typical one measures about 68 × 44 mm and carries around 59 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is AT-02-V2 by ArsenShana.
Microcontrollers on boards using the USBLC6-2SC6 / ESD
What boards using the USBLC6-2SC6 / ESD are built for
USBLC6-2SC6 / ESD: common questions
Where can I find a USBLC6-2SC6 / ESD reference design?
Each of the 1 boards on this page is a real design using the USBLC6-2SC6 / ESD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USBLC6-2SC6 / ESD use?
Most are built on STM32 (1).
How big is a typical board using the USBLC6-2SC6 / ESD?
The median is 68 × 44 mm, and 0% are two-layer designs.
What is the most popular open source board using the USBLC6-2SC6 / ESD?
By GitHub stars, AT-02-V2 by ArsenShana, with 0 stars.
Can I simulate one of these boards using the USBLC6-2SC6 / ESD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.